home *** CD-ROM | disk | FTP | other *** search
- Path: toad.stack.urc.tue.nl!not-for-mail
- From: jaco@stack.urc.tue.nl (Jaco Schoonen)
- Newsgroups: comp.sys.amiga.hardware
- Subject: Re: CyberGraphX / CV64 Questions
- Date: 30 Jan 1996 14:52:36 +0200
- Organization: MCGV Stack, Eindhoven University of Technology, the Netherlands.
- Message-ID: <4el4ak$54u@toad.stack.urc.tue.nl>
- References: <4ejds6$mtr@newsstand.cit.cornell.edu>
- NNTP-Posting-Host: toad.stack.urc.tue.nl
- X-Newsreader: TIN [version 1.2 PL2]
-
- Benjamin Kenobi (fkrj@crux4.cit.cornell.edu) wrote:
-
-
- : After finally getting my CV64 up and running, I have a few questions that
- : I'd like to ask to anyone who can help:
-
- : 1. I would like use CVMode to adjust my Cybervision monitor
- : parameters to be as close to the AGA modes as possible. For example,
- : right now the AGA Productivity screen (640*480) is a different size
- : from the corresponding CyberGraphx screen (the CyberGraphx screen is
- : wider by a fair amount). Can someone give me some hints about how
- : I can adjust my CV screen modes so that they are more "compatible"
- : with the AGA modes?
-
- First, you should know that you can resize the screen with shift-cursor keys
- during the test-screen of CVMode. (Without Shift, you can influence the
- position).
- If it's still too wide, increasing the pixel clock will give you a smaller
- picture.
-
-
-
- : 2. When is Amiga RAM used by the graphics card? As I understand it,
- : the card has its own memory. But I see indications that it uses
- : memory from the Amiga as well. Can someone explain under what
- : circumstances Amiga memory is used?
-
- Always :-(
- Every screen you open in in FAST-ram. Only the actual screen being displayed
- in on the CyberVision's RAM. There were rumours that the authors were
- working on some sort of memory management, but that was a long time ago...
- Just buy more Ram. It's the only option unfortunately....
-
-
- --
- Jaco Schoonen
- (jaco@stack.urc.tue.nl)
-